water management system of beverage production line

water management system

The most important equipment used in the bubble water production line is the water management system.The following is an introduction to it.

1. Source water Pump (Southern Pump Industry)

It is mainly used to overcome the resistance of the preprocessor, while providing sufficient water flow to backwash the preprocessor. With overload and thermal protection; the low level valve through the original water tank can prevent idling by water shortage.

Material: 304 stainless steel

Model number: CHL 6-30

Flow rate: 6T / H

Power: 2.5KW

Elevation: 30M

Weight 50KG

2. Quartz sand filter

Quartz sand filter is to remove the condensed sheets of suspended matter in water and the bonded glial material that can not be removed by precipitation method. It is mainly used as the pretreatment of softening, desalination and pure water system, and can also be used as the coarse filtration of industrial feed water with low requirements. According to the use of filter material, the mechanical filter can be divided into single-layer filter, double-layer filter and multi-layer filter.

The double-layer filter is suitable for precipitated water filtration with turbidity of not more than 60 mg/L, while the single-layer filter is only used for precipitated water filtration with turbidity of raw water not more than 15 mg/L. The effluent turbidity of the mechanical filter is generally controlled below 3 mg/L.

1.Technical parameters

Model number: JDL-6

Source water turbidity: <5g / L

Production capacity: 6T / H

Distribution head loss: 3-4m

Working pressure: 0.2MPa

Overall dimensions: Φ 1400 * 2800

Weight: about 750kg

Material: 304 stainless steel

3.activated carbon filter

The equipment can remove the color, odor and mercury, mercury, lead, cadmium, zinc metal, iron, manganese, chromium and other heavy metal substances, but also remove arsenic, hydride, sulfide, residual chlorine and other polymer compounds and strontium, radium and other radioactive substances, remove and kill bacteria and Escherichia coli and other carcinogens in the water. It is the ideal water supply equipment for domestic drinking water, food, beverage, pharmaceutical industry, chemistry and other industrial water purification equipment.

1. Technical parameters

Model number: HML-6

Source water turbidity: <5g / L

Production capacity: 6T / H

Distribution head loss: 3-4m

Working pressure: 0.2MPa

Overall dimensions: Φ 1400 * 2800

Weight: about 650kg

Material: 304 stainless steel

The effluent quality shall meet the national standard for drinking water quality

4.Sodium ion exchanger

Sodium ion exchanger Yin and cation exchanger are the main equipment used for initial desalting or preparation of high purity water. When the salt content of raw water is below 500 mg/L, the salt content of outlet water can be reduced to about 5~10m / L after the Yin and cation exchanger, which can be directly used for high pressure boiler or electronic, chemical, pharmaceutical, atomic and other energy. When the water quality requirements are higher, secondary or Yin mixed bed ion exchanger can be set for further treatment. The process of chemical desalting is to remove the raw water through the H-type cation exchanger (i. e., Yang bed) and OH type anion exchanger (i. e. Yin bed), through ion exchange reaction to remove the Yin and cations in the water to obtain high purity water.

1. Technical parameters

Model number: SNJ-6

Source water turbidity: <5g / L

Production capacity: 6T / H

Distribution head loss: 3-4m

Working pressure: 0.2MPa

Overall dimensions: Φ 1400 * 2800

Weight: about 600kg

Material: 304 stainless steel

5.precision filter

Precision filter is made of high and new technology, polymer materials microporous filter membrane filter medium, is one of the effective means to solve the problem of material separation, is a modern advanced equipment, it has high filtration efficiency, good quality, easy operation, the advantages of low production cost, is the replacement of Plate Frame Filter products, its application range is very wide, is medicine, beverage, electronics, chemical industry, water treatment and other industries indispensable for equipment.

1. Technical parameters

Model number: JML-6

Production capacity: 6m³ / h

Working pressure: 0.2MPa

Filter element accuracy: 0.45 μ m

verall dimensions: Φ 500

Operating temperature: 5~45

Material: 304 stainless steel

6. Primary RO reverse osmosis unit

The key to reverse osmosis (RO) technology is the reverse osmosis membrane. Reverse osmosis membrane is a chemical synthesis of polymer membrane, in the synthesis process of the reverse osmosis membrane has many pores through the action between molecules. The pore size of these pores is 0.0001 – 0.001 microns, which is comparable to the diameter of the molecule. Almost all harmful impurities are hundreds of times larger than water molecules, and the smallest virus is dozens of times larger than water molecules. Toxic lead, mercury, chromium and other heavy metal salts, carcinogenic nitrite, cause bone deformation fluorine pollution and produce water alkali and stone disease, hypertension, cardiovascular disease related calcium, magnesium, iron, manganese, aluminum salts are in the form of hydration ions in water, they are 10-20 times larger than water molecules. The reverse osmosis membrane completely removes these impurities listed above by selection of particle size and rejection of charged particles.

1. Technical parameters

Model number: RO-3

Production capacity: 3T / h

Overall dimensions: 2500 * 800 * 1500

Reverse osmosis membrane: 4040 membrane American Hyde energy brand

Weight: 500kg

Material: stainless steel

7.ultraviolet sterilizer

Ultraviolet sterilizer is made of high quality stainless steel, this material has high reflection efficiency for ultraviolet light, and will not rust, there is no harmful metal pollution in the process of use, meet the requirements of food industry hygiene, the structure of the sterilizer is a dense container under the inner pressure.

1.scope of application

Drinking water disinfection of industrial and mining enterprises, government organs, schools, hotels, restaurants, and beverage units.

Food, beverage, pharmaceutical, brewing and various primary laboratory analysis disinfection with water

Other raw water directly drinking units can be selected

2. Technical parameters

Model number: ZM-6

Production capacity: 5-6T / H

Working pressure: 0.2 mpa

Overall dimensions: 650 * 400 * 720

Weight: 60kg

8. Sanitary Storage Tank

Rust steel Storage tank is a sterile storage tank device is widely used in food engineering, water treatment engineering and many other fields.

A newly designed storage equipment, with the advantages of convenient operation, corrosion resistance, strong production capacity,

convenient cleaning, shock shock, is one of the key equipment stored in production.

1. Equipment structure

structure:Single-layer, vertical structure;

Pipe mouth configuration:Inlet, breathing and outle

material quality:304 Stainless steel, plate thickness of 2mm

company introduction