+86-0577-86997177
Blow the bottle system
Connection drawing of bottle blower:
2. Model introduction
description:
Automatic bottle blower is a two-step automatic bottle blowing equipment, used for PET, PP plastic bottle blank forming processing. It can blow a variety of geometric pure water bottles, medicine bottles, cosmetic bottles, large caliber bottles and other packaging containers. This machine adopts advanced microcomputer control system with stable performance and the conveyor. Using far infrared lamp heating, strong penetration, rotation heating, uniform heating, fast and reliable. The width and height of the lamp reflection plate in the heating area can be adjusted to accommodate the cylinder heating of different structures, and there is an automatic heating device to ensure the constant temperature of the drying channel. The locking part adopts mechanical double curved arm locking mode, supercharging locking mode, to ensure that the mode shifting (blast mode) phenomenon does not appear under high pressure. The air design is divided into two parts: action and blowing. The production process is fully automated. It has the advantages of high efficiency, convenient operation, simple maintenance and safety.This line widely used as Food & Beverage Machinery and Pharmaceutical Machinery.
characteristic:
● Using Hamina advanced cast iron.
● The machine operates completely automatically.
● Use a servo motor to drive the ring chain.
● Serservo mono channel epiblast was used.
● Touch-type operation is simple and convenient
● Use hydraulic lock mode and high pressure compensation lock.
● The oven lamp tube and fan adopt constant control (PID).
● Combined high-pressure valve made of magnesium and aluminum alloy, and with gas recovery function.
3. Technical parameters:
|
| Model | Unit | parameter |
| Forming group specifications
| Module number | cavities | 4 |
| Lock mode force | KG | 42000 | |
| Mold travel | mm | 90 | |
| Pull rod trip | mm | 250 | |
| Bottom model itinerary | mm | 30 | |
| The bottle spacing | mm | 76.2 | |
| Heating spacing | mm | 76.2 | |
| Number of embryo head | PCS | 114 | |
| Bottle specification
| The maximum capacity of the bottle | ltr | 0.6L-1.0L |
| Dental dimensions (outer diameter) | mm | 38 | |
| Maximum vival height | mm | 100 | |
| Maximum bottle diameter | mm | 65 | |
| Maximum bottle height | mm | 250 | |
| ※Admidia theory production capacity | B.P.H | 3500 | |
| Electrical control specifications | Number of heating boxes | UNITS | 8*7 |
| (Number of box lamp pipe) | |||
| Number of lamps | pcs | 56 | |
| Heating configuration power | KW | 67.2 | |
| Total power capacity | KW | 75 | |
| voltage | Voltage | 220v/380V/3 phase | |
| Air pressure specifications
| on-stream pressure | kg/m3 | 7 |
| Blow bottle pressure | kg/m3 | 30-40 | |
| High-pressure air capacity for oxygen consumption | L/min | 6000 | |
| Configuring power | KW | 44 | |
| Cooling water specifications | temperature range | °C | 10-15 |
| pressure | Mpa | 0.3-0.5 | |
| rate of flow | L/min | 80 | |
| power rating | HP | 6 | |
| Machine table specifications | Host size(L×W×H) | M | 4.8*2.2*2.2 |
| Machine weight | KG | 4500 | |
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
